The
System
The Easiest Slat Fencing Install in Australia
Install Instructions
What you'll need.
- InstaPanel
- F-Section
- Self Tapping Hex Heads
- Your Choice of Fixings
- Cutting Saw
- Electric Drill
- Level
Step 1 - Mounting the F-Section
Your first objective when installing the InstaPanel system should be figuring out how you will mount the F-Section, whether you are using posts, brick piers or a standard wall, an F-Section will be needed. The F-Section can be installed using Standard Green Plugs when installing into Brick, or our Self-Tapping Hex Heads can be used when installing into our Posts.
Step 2 - Installing the InstaPanel
Now this is probably the easiest part. All you need to do is take your fabricated InstaPanel, and slide it into the F-Section. Once completed, you can choose to either leave it as is, or use our Self-Tapping Hex Heads to fix the panel in place.
Additional Information
135deg Fence Channel
If you have an angled post or an angled pillar, the standard angle you will see in construction will be a 135° or 45° angle. This specially designed fencing channel will allow you to easily install a fence panel on an angle.Â
